메인메뉴 바로가기 본문으로 바로가기

교수진소개

HOME 교수/연구교수진소개
  • 표명호

    표명호 교수

    직급
    교수
    전공
    빅데이터? 계산과학, 에너지 신물질탐색
    전화번호
    061-750-3638
    이메일
    mho@scnu.ac.kr
    실험실명
    에너지소재 연구실

    학력

    • 서울대학교 학사
    • 서울대학교 석사
    • 미국 플로리다 대학교 박사

    주요경력

    • 인쇄전자공학과 학과장
    • 순천대학교 BK21+ 사업단장
    • 차세대 IT융합소재연구소 연구소장

    주요연구실적

    • Graphene oxide self-assembled with a cationic fullerene for high performance pseudo-capacitors   [Journal of Materials Chemistry A,4(2016)]
    • Critical parameters governing energy density of Li-storage cathode materials unraveled by confirmatory factor analysis [Journal of Power Sources,307(2016)]
    • Graphite oxide as an efficient and robust support for Pt nanoparticles in electrocatalytic methanol oxidation [Electrochimica Acta, 188(2016)]
    • Highly crystalline Prussian blue/graphene composites for high-rate performance cathodes in Na-ion batteries [RSC Advances,5(2015)]
    • Enhanced Electrochemical Stability of Graphite Anodes via Adsorption of Reductively Polymerizable Dibromothiophene in Lithium Ion Batteries [Journal of the Electrochemical Society,161(2014)]
    • SnO2/Graphene Composites with Self-Assembled Alternating Oxide and Amine Layers of High Li-Storage and Excellent Stability [Advanced Materials, 25(2013)]
    • Graphene oxide as a corrosion inhibitor for the aluminum current collector in lithium ion batteries [Carbon,52(2013)]
    • A New Paradigm for Materials Discovery : Heuristics-Assisted Combinatorial Chemistry Involving Parameterization of Material Novelty [Advanced Functional Materials,22(2012)]
    • Genetic Algorithm-assisted optimization of partially dyed-TiO2 for room-temperature printable photoanodes of dye-sensitized solar cells [J.Mater.Chem,22(2012)]
    • Suppression of Phase Transition in LiTb0.01Mn1.99O4 Cathodes with FastLi+ Diffusion [ACS Applied Materials & Interfaces,4(2012)]
  • 최시훈

    최시훈 교수

    직급
    교수
    전공
    구조재료(Fe, Al, Mg 등)?부품, 계산과학 기반 합금/공정 설계
    전화번호
    061-750-3556
    이메일
    shihoon@scnu.ac.kr
    실험실명
    미소역학 및 미세조직제어 연구실

    학력

    • 인하대 금속공학과 학사 (1991)
    • 서울대 금속공학과 석사 (1994)
    • 서울대 금속공학과 박사 (1998)

    주요경력

    • 1998.3. ~ 1999.3. 신소재공동연구소, 서울대학교 소성가공공정연구실 Post Doc
    • 1998.10. ~ 1999.10. Alcoa 기술연구소, USA Micromechanics 그룹 Post Doc
    • 2000.3. ~ 2004.3. POSCO 기술연구소 자동차소재연구그룹 선임연구원
    • 2004.4. ~ 2005.3. POSCO 기술연구소 자동차소재연구그룹 책임연구원
    • 2005.4. ~ 2013.5. 순천대학교 부교수
    • 2013.6. ~ 현재. 순천대학교 교수

    주요연구실적

    • J Singh, MS Kim, L Kaushik, J-H Kang, D Kim, E Martin, S-H Choi ; Twinning-detwinning behavior of E-form Mg alloy sheets during in-plane reverse loading, International Journal of Plasticity, Vol.127 (2020), 102637
    • J Singh, MS Kim, S-H Choi; The effect of initial texture on micromechanical deformation behaviors in Mg alloys under a mini-V-bending test, International Journal of Plasticity, Vol.117 (2019), 33-57
    • J Singh, MS Kim, J-H Lee, H Guim, S-H Choi; Microstructure evolution and deformation behaviors of E-form and AZ31 Mg alloys during ex-situ mini-V-bending tests, Journal of Alloys and Compounds, Vol.778 (2019), 124-133
    • DK Kim, W Woo, E-Y Kim, S-H Choi; Microstructure and mechanical characteristics of multi-layered materials composed of 316L stainless steel and ferritic steel produced by direct energy deposition, Journal of Alloys and Compounds, Vol.774 (2019), 896-907
    • CS Hyun, MS Kim, S-H Choi, KS Shin; Crystal plasticity FEM study of twinning and slip in a Mg single crystal by Erichsen test, Acta Materialia, Vol.156 (2018), 342-355
  • 이지면

    이지면 교수

    직급
    교수
    전공
    나노소재? 소자
    전화번호
    061-750-3558
    이메일
    jimlee@scnu.ac.kr
    실험실명
    나노재료소자 연구실

    학력

    • 1989. 3. ~ 1996. 2. 성균관대학교 금속공학과 공학학사
    • 1996. 3. ~ 1998. 2. 광주과학기술원 신소재공학과 공학석사
    • 1998. 3. ~ 2002. 2. 광주과학기술원 신소재공학과 공학박사

    주요경력

    • 2002. 1. ~ 2004. 2. 한국전자통신연구원 광통신소자연구부 선임연구원
    • 2004. 2. ~ 2005. 1. 국립순천대학교 재료금속공학과 전임강사
    • 2005. 1. ~ 2009. 4. 국립순천대학교 재료금속공학과 조교수
    • 2005. 1. ~ 2005. 12. 일본산업기술종합연구소 (AIST) 초빙 연구원
    • 2007. 8. ~ 2008. 7. 미국 RPI 방문 교수
    • 2009. 5. ~ 2014. 4.국립순천대학교 재료금속공학과 부교수
    • 2014. 5. ~ 현재. 국립순천대학교 인쇄전자공학과 교수
    • 2020. 3. ~ 현재. 국립순천대학교 첨단부품소재공학과 교수

    주요연구실적

    • Maddumage Don Sandeepa Lakshad Wimalananda, Jae-Kwan Kim, Ji-Myon Lee, Characteristics of highly area-mismatched graphene-to-substrate transfers and the predictability of wrinkle formation in graphene for stretchable electronics. Advanced Materials Interfaces (in print)
    • Maddumage Don Sandeepa Lakshad Wimalananda, Jae-Kwan Kim, Ji-Myon Lee, Morphological effect and conductivity tunability of different regions in a single graphene film by surface steps, Carbon,165, 1-8 (2020)
    • Maddumage Don Sandeepa Lakshad Wimalananda, Jae-Kwan Kim, Ji-Myon Lee, Selective growth of monolayer and bilayer graphene patterns by rapid growth method, Nanoscale, 11, 6727 ? 6736 (2019)
    • Kondasinghe Gayantha Nishan Thilawala, Jae-Kwan Kim, and Ji-Myon Lee, Potential of Graphene for Shape-Directing Agent free Growth of Highly Oriented Silver Particles and their Application in Surface Enhanced Raman Scattering. J. Alloy. Compd. 787, 893-902 (2019).
    • Kondasinghe Gayantha Nishan Thilawala, Jae-Kwan Kim, Ji-Myon Lee, Improvement of Conductivity of Graphene-Silver Nanowire Hybrid through Nitrogen Doping using Low Power Plasma Treatment, J. Alloy. Compd. 773, 1009-1017 (2019).
    • Bastian Waduge Naveen Harindu Hemasiri, Jae-Kwan Kim, Ji-Myon Lee, Synthesis and characterization of graphene/ITO nanoparticle hybrid transparent conducting electrode, Nano-Micro Lett. 10, 18 (2018).
    • Maddumage Don Sandeepa Lakshad Wimalananda, Jae-Kwan Kim, Ji-Myon Lee, Patterning of silver nanowire for grid formation by using ultrasonic assisted clean chemical etching for the application of high transparent electrode, Mater. Sci. & Eng. B. 228, 67-73 (2018).
    • Maddumage Don Sandeepa Lakshad Wimalananda, Jae-Kwan Kim, Ji-Myon Lee, Towards the ultra-transparent electrode by using patterned silver nanowire and graphene layered materials, Carbon, 125, 9-19 (2017).
    • Bastian Waduge Naveen Harindu Hemasiri, Jae-Kwan Kim, Ji-Myon Lee, Fabrication of Highly Conductive Graphene/ITO Transparent Bi-Film through CVD and Organic Additives-Free Sol-Gel Techniques, Sci. Rep. 7, 17868
    • M. D. S. Lakshad Wimalananda, Jae-Kwan Kim, Ji-Myon Lee, Rapid synthesis of a continuous graphene film by chemical vapor deposition on Cu foil with various morphological condition modified by Ar plasma, Carbon, 120, 176-184 (2017).
  • B.C.KIM

    B.C.KIM 교수

    직급
    교수
    전공
    에너지소재? 소자
    전화번호
    061-750-5261
    이메일
    bckim@scnu.ac.kr
    실험실명
    전기전자소재 연구실

    학력

    • 박사학위, 1999
      울릉공 대학 화학과, 호주.
    • 석사학위, 1990
      동아대학교 대학원, 화학공학과.
    • 학사학위, 1987
      국립 부경대학교, 화학공학과

    주요경력

    • 2000 ~ 99, 연구원울릉공대학 부설 지능형고분자연구소, 호주
    • 2002 ~ 00, 일본 문부성 초빙 박사후 연구원치토세 과학기술 대학교, 일본
    • 2011 ~ 02, 전문 연구원울릉공대학 부설 지능형고분자연구소, 호주
    • 2018 ~ 11, 수석연구원호주 연방 우수 전자재료 연구소
    • 특별초빙교수동국대학교 화학과, 서울
    • 2018 - 현재, 부교수,국립순천대학교, 인쇄전자공학과

    주요연구실적

      Top 10 publications
    • 1. Amol Marotrao Kale, Ramu Manikandan, C. Justin Raj, Rajavel Velayutham, Won-Je Cho, Byung Chul Kim*, Post Synthetic Annealing of Zeolitic Imidazolate Framework-67 for High-Performance Hybrid Supercapacitors, Applied Surface Science 542 (2021) 148716 (IF: 6.182)
    • 2. Murugesan Rajesh, Ramu Manikandan, Byung Chul Kim, Matthieu Becuwe, Kook Hyun Yu, C. Justin Raj, Electrochemical polymerization of chloride doped PEDOT hierarchical porous nanostructure on graphite as a potential electrode for high performance supercapacitor, Electrochimica Acta 354 (2020) 136669 (IF: 6.216)
    • 3. Ramu Manikandan, Chellan Justin Raj, Goli Nagaraju, J. Puigdollers, C. Voz, and Byung Chul Kim*, A self-branched lamination of hierarchical patronite nanoarchitectures on carbon fiber cloth as novel electrode for ionic liquid electrolyte-based high energy density supercapacitors, Advanced Functional Materials, (2019) 1906586 (IF: 16.836)
    • 4. Ramu Manikandan, C. Justin Raj, Goli Nagaraju, Myoungho Pyo, and Byung Chul Kim*, Selective design of binder-free hierarchical nickel molybdenum sulfide as a novel battery-type material for hybrid supercapacitors, Journal of materials chemistry A, 7 (2019) 25467-25480 (IF: 11.301)
    • 5. Ramu Manikandan, C. Justin Raj, Kook Hyun Yu, Byung Chul Kim*, Self-coupled nickel sulfide @ nickel vanadium sulfide nanostructure as a novel high capacity electrode material for supercapattery, Applied Surface Science 497 (2019) 143778 (IF: 6.182)
    • 6. C. Justin Raj, Murugesan Rajesh, Ramu Manikandan, Kook Hyun Yu, J. R. Anusha, Jun Hwan Ahn, Dong-Won Kim, Sang Yeup Park, Byung Chul Kim*, High electrochemical capacitor performance of oxygen and nitrogen enriched activated carbon derived from the pyrolysis and activation of squid gladius chitin, Journal of Power Sources 386 (2018) 66-76 (IF: 8.247)
    • 7. C. Justin Raj, Ramu Manikandan, Won-Gil Lee, Won-Je Cho, Kook Hyun Yu, Byung Chul Kim*, Polypyrrole thin film on electrochemically modified graphite surface for mechanically stable and high-performance supercapacitor electrodes, Electrochimica Acta 283 (2018) 1543-1550 (IF: 6.216)
    • 8. Justin Raj, Murugesan Rajesh, Ramu Manikandan, Ju Yong Sim, Sang Yeup Park, Jun Ho Song, Kook Hyun Yu, Byung Chul Kim*, Two-Dimensional Planar Supercapacitor Based on Zinc Oxide/Manganese Oxide Core/Shell Nano-architecture, Electrochimica Acta 247 (2017) 949-957 (IF: 6.216)
    • 9. Murugesan Rajesh, C. Justin Raj, Byung Chul Kim, Bo-Bao Cho, Jang Myoun Ko, Kook Hyun Yu, Supercapacitive studies on electropolymerized natural organic phosphate doped polypyrrole thin films, Electrochimica Acta 220 (2016) 373-383 (IF: 6.216)
    • 10. Byung Chul Kim, Jing Yong Hong, Ho Seok Park*, Gordon G. Wallace*, Recent progress in materials, device configurations, and functions for flexible electrochemical capacitors, Advanced Energy Materials, 5 (2015) (1-13) 1500959 (IF: 25.245)
  • 박운배

    박운배 교수

    직급
    조교수
    전공
    빅데이터? 인공지능, Materials Informatics
    전화번호
    061-750-5262
    이메일
    wbpark@scnu.ac.kr
    실험실명
    재료정보과학 연구실

    학력

    • 2003 년 3 월 - 2010 년 2 월
      이학사, 순천대학교 물리학과
    • 2010 년 3 월 - 2012 년 2 월
      공학석사, 순천대학교 인쇄전자공학과
    • 2012 년 3 월 - 2015 년 2 월
      공학박사, 순천대학교 인쇄전자공학과

    주요경력

    • 2015 년 3 월 ? 2020 년 2 월연구교수, 세종대학교 나노신소재공학과
    • 2020 년 3 월 ? 현재조교수, 국립순천대학교 인쇄전자공학과

    주요연구실적

    • A deep-learning technique for phase identification in multiphase inorganic compounds using synthetic XRD powder patterns [Nature communications 11(1), 1-11, 2020.]
    • Rb3SiF7:Mn4+ and Rb2CsSiF7:Mn4+ Red-Emitting Phosphors with a Faster Decay Rate [Chemistry of Materials 30(19), 6936-6944, 2018.]
    • Combinatorial Screening of Luminescent and Structural Properties in a Ce3+-Doped Ln-Al-Si-O N (Ln = Y, La, Gd, Lu) System: The Discovery of a Novel Gd3Al3+xSi3?xO12+xN2?x:Ce3+ Phosphor [Inorganic Chemistry 54(4), 1829-1840, 2015.]
    • Discovery of a novel phosphor for LED applications and its structural determination; Ba(Si,Al)5(O,N)8:Eu2+ [Journal of the American Chemical Society 136, 2363, 2014.]
    • A new paradigm for materials discovery: Heuristics-assisted combinatorial chemistry involving parameterization of material novelty [Advanced Functional Materials 22, 2258, 2012.]
  • 조성운

    조성운 교수

    직급
    조교수
    전공
    인쇄전자 소재 및 공정, AI 및 휴머노이드용 전자소자
    전화번호
    061-750-5263
    이메일
    swcho@scnu.ac.kr
    실험실명
    지능형 인쇄재료소자 연구실

    학력

    • 성균관대학교신소재공학과 (학사, 2011)
    • 성균관대학교신소재공학과 (박사, 2018)

    주요경력

    • 중앙대학교전기전자공학과 박사후 연구원
    • 성균관대학교신소재공학과 박사후 연구원
    • 삼성전자 LCD 사업부 연구원

    주요연구실적

    • Catalytic Metals-Accelerated Crystallization of High-Performance Solution-Processed Earth-Abundant Metal Oxide Semiconductors [ACS Applied Materials & Interfaces , (2020), 12, 25000-25010]
    • Smart Bifunctional Sb 2 Se 3 Nanorods for Integrated Water Purification: Insoluble Fluid Separation and Photoelectrochemical Water?soluble?organic Degradation [ChemSusChem , (2020), 13, 3017-3027]
    • Multi-Spectral Gate-Triggered Heterogeneous Photonic Neuro-transistors for Power-Efficient Brain-Inspired Neuromorphic Computing [Nano Energy, (2019), 66, 104097]
    • Environment-Adaptable Artificial Visual Perception Behaviors Using a Light-Adjustable Optoelectronic Neuromorphic Device Array [Advanced Materials, (2019), 31, 1906433]
    • All-solution-processed metal oxide/chalcogenide hybrid full-color phototransistors with multi-stacked functional layers and composition-gradient heterointerface [Advanced Optical Materials , (2018), 6, 1800196]
  • 이종수

    이종수 교수

    직급
    조교수
    전공
    R2R프린팅, 전자부품·바이오소자
    전화번호
    061-750-5264
    이메일
    jslee0505@scnu.ac.kr
    실험실명
    대면적유연소자제조 시스템 연구실

    학력

    • B.S., M.S., Ph.D., Department of Mechanical Design and Production Engineering, Konkuk Univeristy, Seoul, Korea.

    주요경력

    • Assistant professor, Advanced Components and Materials Engineering, Sunchon National University (2020.02 ? Current)
    • Post-doctoral research fellow, Laboratory for Polymer Innovation for Advanced Organic Electronic (PI-AOE), Purdue University, USA (2019.09 ? 2020.02).
    • Associate research engineer, RPS.co.ltd, South Korea (2016.09 ? 2019.07).
    • Visiting researcher, VTT Technical Research Centre of Finland, Oulu, Finland (2015.06 ? 2015.07).

    주요연구실적

    Google scholar profile: https://scholar.google.co.kr/citations?user=WvS4nA0AAAAJ&hl=ko
    Journal papers
    • J. Lee, B.-H. Park and C. Lee, “Fault diagnosis based on the quantification of the fault features in a rotary machine,” Applied soft computing, 106726 (2020) (Impact factor Top 7.8% in Computer science, interdisciplinary applications)
    • P. Su, H. Hu, J. Lee and J. Laskin et al, “Preparative mass spectrometry using a rotating-wall mass analyzer”, Angewandte Chemie, (2020) (Impact factor Top 8.1% in Chemistry, multidisciplinary)
    • J. Lee, S. Kim, and C. Lee, “Large area electrolyte coating through surface and interface engineering in roll-to-roll slot-die coating process,” Journal of Industrial and Engineering Chemistry, 76, (2019) 443-449. (Impact factor Top 9.8% in Engineering, Chemical)
    • J. Lee, and C. Lee, “Model-Based Winding Tension Profile to Minimize Radial Stress in a Flexible Substrate in a Roll-to-Roll Web Transporting System,” IEEE/ASME Transactions on Mechatronics, 23(6), (2018) 2928-2939. (Impact factor Top 5% in Engineering, Mechanical)
    • J. Lee, and C. Lee, “An advanced model for the numerical analysis of the radial stress in center-wound rolls,” International Journal of Mechanical Sciences, 105, (2016) 360-368. (Impact factor Top 10% in Mechanics)
    • J. Lee, J. Park, H. Jeong, KH Shin, and D. Lee, “Optimization of printing conditions for microscale multiline printing in continuous roll-to-roll gravure printing,” Journal of Industrial and Engineering Chemistry, 42, (2016) 131-141. (Impact factor Top 9.8% in Engineering, Chemical)
    • J. Lee, J. Seong, J. Park, S. Park, D. Lee, and K.-H. Shin, “Register control algorithm for high resolution multilayer printing in the roll-to-roll process,” Mechanical Systems and Signal Processing, 60-61 (2015) 706-714. (Impact factor Top 4.5% in Engineering, Mechanical)
    Patents (PCT)
    • Air cylinder, 2020022628, Published, 01/30/2020.
    • Stiffness control apparatus of air bearing, 2019013368, Published, 01/17/2019.
    • Stiffness control apparatus of air bearing, 2019013367, Published, 01/17/2019.
    Patents (국내)
    • 롤투롤 생산공정에서 동특성 개선을 위한 레지스터 제어 시스템 (Register control system for a better dynamic characteristics in a roll-to-roll manufacturing system), KR 102139880, Granted, 07/24/2020.
    • 에어 베어링의 강성조절장치 (Apparatus for adjusting stiffness of air bearing), KR 101965323, Granted, 03/28/2019.
    • 투명전도성 필름 제조장치 및 제조방법 (Apparatus and method for manufacturing transparent conductive film), KR 102008447, Granted, 08/01/2019.
    • 압력센서 및 그 제조방법 (Pressure sensor and method of manufacturing the same), KR 101813230, Granted, 12/21/2017.
    • 고정밀 레지스터 제어 시스템 및 방법 (High-precision Register Control System and Method), KR 1017439820000, Granted, 05/31/2017.
    Awards
    • IJPEM?Green Technology Contribution Award (2020.16)
    • Academic award at Konkuk University (2019.02)
    • Best paper in Int. J. Precis. Eng. Manuf. in the third quarter (2018.08)
    • Best paper award for the 2015 ICFPE at the Int. Conf. Flexi. Print. Electron., Taiwan. (2015.10)
    • Best paper award for the 2014 KSPE at the Korean Soc. Precis. Eng., Korea. (2014.10)
    • Best presentation on Functional Printing at the Fourth Int. Conf. Print. Future Days, Germany (2011.10)
맨위로 가기