학력

• 전남대학교 기계설계학과, 공학사
• 전남대학교 기계공학과, 공학석사
• 전남대학교 기계공학과, 공학박사

주요경력

• POSCO 기술연구소

연구분야

• 공력해석
• 나노유체
• 히트파이프

주요연구실적

• 회전하는 블레이드 주위의 유동가시화 및 전산유동해석
• 덕트형상에 따른 동축반전 로터블레이드 주위의 전산유동해석
• 틸트각 변화에 따른 틸트로터 항공기 주위의 유동해석
• Numerical simulation of laminar forced convection heat transfer of Al₂O₃-water nanofluid in a pipe with return bend
• 열사이펀의 형상비와 충전율에 따른 열전달 성능 해석
• Effects of mass transfer time relaxation parameters on condensation in a thermosyphon
• 진동형 히트 파이프에서 튜브의 지름과 개수에 따른 전산 열유동해석
• 공개 소스코드를 이용한 진동형 히트파이프에 대한 수치해석
• Numerical simulation of oscillatory flow and heat transfer in pulsating heat pipes with multi-turns using OpenFOAM
• 다양한 매개변수에 따른 관내 나노유체의 성능지수
• 개방형 구조의 진동형 히트파이프의 응축부 길이에 따른 추력 및 유동 가시화
• 전산 해석에서 압축성 작동유체의 상변화와 고체 벽 영역이 진동형 히트파이프에 미치는 영향

학력

• [1990년] 한국항공대학교 항공기계공학과 (학사)
• [1992년] 한국과학기술원(KAIST) 항공우주공학과 (석사)
• [1997년] 한국과학기술원(KAIST) 항공우주공학과 (박사, 비행역학 및 제어전공)

주요경력

• [1997.02 ~ 2000.05] 대우고등기술연구원 선임연구원
• [2000.06 ~ 2001.09 ]삼성SDS 과장
• [2001.10 ~ 2006.02] 한국원자력연구소 선임연구원

연구분야

• 비행제어,위성 자세제어, 고장 진단, 반구형 공진 자이로, FPGA 등

주요연구실적

• (1) Bong-Kyu Park, Min-Jea Tahk, Hyochoong Bang, Chang-Su Park, Jaehyun Jin, "A new approach to on-board stationkeeping of GEO-satellites," Aerospace Science and Technology, Vol. 9, No. 8, pp. 722-731, 2005.
• (2) Jaehyun Jin, "Modified Pseudo Inverse Redistribution Methods for Redundant Controls Allocation," AIAA Journal of Guidance, Control, and Dynamics, Vol. 28, No. 5, pp.1076-1079,2005.
• (3) Jaehyun Jin and Min-Jea Tahk, "Time-delayed state estimation for linear systems with unknown inputs," International Journal of Control, Automation, and Systems, Vol. 3, No.1, pp. 117-121, 2005
• (4) 진재현, 유창선, 류혁, 탁민제, "시간 지연 제어를 이용한 내고장 비행제어 기법," 한국항공우주학회지, 33권 12호, pp. 54-60, 2005년 12월.
• (5) 진재현, 박영웅, 박봉규, 탁민제, "여유 조종력 할당기법을 이용한 인공위성의 여유 추력기 제어," 한국항공우주학회지, 32권 10호, pp.60-66, 2004년 12월.
• (6) 진재현, 유창선, 류혁, 탁민제, "수정된 의사역행력 재분배 기법을 이용한 여유 조종력 할당," 한국항공우주학회지, 32권 9호, pp.65-71, 2004년 11월.
• (7) 진재현, 박병석, 안성호, 윤지섭, "여유 자유도를 갖는 서보 매니퓰레이터의 내고장 제어를 위한 재형상 기법," 제어자동화시스템공학 논문지, 10권 10호, pp.899-906, 2004년 10월.
• (8) 진재현, 박병석, 안성호, 윤지섭, "여유 자유도에 대한 조종력 배분을 통한 원격작업용 서보매니퓰레이터의 내고장 제어," 전기학회논문지, 53D권 4호, pp.235-245, 2004년 4월.
• (9) "비인과적 비행 시뮬레이션 프로그램 개발과 개념설계에의 응용", 한국기계기술학회지, Vol.17, No.3, pp.497-504, 2015.
• (10) "Observer Design for Satellite Angular Rate Estimation Using the State-Dependent Riccati Equation Method", IEEE Transactions on Aerospace and Electronic Systems, Vol.51, No.3, pp.2496-2501, 2015.
• (11) "Modelica를 이용한 인공위성 동작 통합시뮬레이션 프로그램 개발", 항공우주시스템공학회지, Vol.9, No.3, pp.39-46, Sept. 2015.
• (12) "2개의 가변속 제어모멘트자이로를 이용한 인공위성의 자세제어", 제어.로봇.시스템학회 논문지, vol.21, No.11, pp.1027-1033, November 2015
• (13) "(by 성태현) 차세대 소형위성 호 충격시험 계측 분석 프로그램 개발", Vol.10, No.2, pp.34-40, 2016
• (14) "PC 기반의 항공기 시뮬레이터 개발, 한국기계기술학회지", Vol.18, No.5, Nov. pp.700-706, 2016
• (15) "제어모멘트자이로 구동법칙을 위한 부피개념의 특이성 지수", 제어.로봇.시스템학회논문지, Vol.23, No.1, pp.8-14, January 2017.
• (16) "소형 쿼드로터 드론 개발을 위한 6자유도 운동 실험장치," 항공우주시스템공학회지, Vol.11, No.1, pp.41-46, 2017.
• (17) "비인과, 객체지향적 언어 모델리카를 이용한 멀티콥터형 드론의 통합 비행 시뮬레이션 프로그램", 한국항공우주학회지, vol.45, No.5, pp.437-446, May 2017.
• (17) "액체 연료의 슬라슁과 상호작용하는 우주 탐사선의 자세 운동 분석," 한국항공우주학회지, Vol.45, No.12, pp.1059-1068, December 2017.
• (18) "(by Henzeh Leeghim) Feasible angular momentum of spacecraft installed with control moment gyros," Advances in Space Research, vol.61, No.1, pp.466?477, 2018.
• (19) "다중 GNSS 수신기를 이용한 수신기의 오동작 검출 및 위치 추정 성능 향상," 제어.로봇.시스템학회논문지, Vol.24, No.1, pp.102-109, January 2018.
• (20) "삼중 관성 센서의 고장검출을 위한 잔차 생성 기법," 제어.로봇.시스템학회논문지, Vol.24, No.4, pp.346-353, April 2018.
• (21) "Attitude Control of Underactuated and Momentum-Biased Satellite by Using State-Dependent Riccati Equation Method," International Journal of Aeronautical & Space Sciences, Vol.20, No.1, pp.204-213, 2019.
• (22) "다분야 설계 최적화 기법을 이용한 단거리 탄도 미사일의 초기형상 설계," 한국항공우주학회지, Vol.47, No.3, pp.228-239, 2019.

학력

• Post Doc. Univ. of Illinois at Chicago, Dept. of Mechanical Engineering, 2002
• Ph.D. KAIST, Dept. of Mechanical Engineering, Feb. 1998
• M.S. Graduate School of Inha University, Dept. of Mechanical Engineering, Feb. 1986
• B.S. Inha University, Engineering College, Feb. 1983

주요경력

• Visiting Scholar, Sydney University, Dept. of Mechanical Engineering, 2012, Australia
• Sunchon National University, Suncheon City, Jeollanamdo, Korea Professor (March. 2007 ~ Present), Dept. of Aerospace Engineering
• Jeonnam Provincial College, Damyang Gun, Jeollanamdo, Korea Associate Professor (Feb. 1998 ~ March. 2007), Dept. of Mechanical Engineering
• LG Electronics Co., LTD, Seoul, Korea Senior Researcher (Jan. 1988 ~ Feb. 1998), LG Digital Appliance Research Institute
• Korea Institute of Energy Research (KIER), Daejeon, Korea

연구분야

• Combustion Technology
  Flame Structure, Flame Interaction, Porous Combustion, Impinging Jet Flame, Stratified Combustion
• Gas Turbine Combustion
  Swirling Flame, Low Swirl Flame, Lean Burn, Flame Instability
• Alternative Fuel Combustion
  Synthetic Natural Gas(SNG), Hydrogen(H2), DME Combustion
• Laser Diagnostic : PIV, PDPA, LIF, PLIF, Mie-Scattering Method

강의과목

• 열역학, 열전달, 항공우주추진기관, 연소공학, 가스터빈공학, 내연기관

학회활동 및 수상경력

Professional Membership

• Member of International Combustion Institute, Chairman of Korea Section (2018.1 ~ 2019.12)
• Member of Korea Society of Combustion (KOSCO), President(2018.1 ~ 2019.12)
• Member of Korea Society of Combustion (KOSCO), Vice-President (2016.1 ~ 2017.12)
• Member of Korea Society of Propulsion Engineering (KSPE), General Affairs Director
• Member of Korea Society of Mechanical Engineering (KSME)
• Member of Korea Society for Aeronautical and Space Science (KSASS)
• Member of Korea Society of Mechanical Technology (KSMT), Editor
• Member of Korea Hydrogen & New Energy Society (KHNES)
• Member of Korea Academia-Industrial Cooperation Society (KAIS)

Awards and Honors

• Best Research Professor Award, Sunchon National University, 2016 ~ 2020 (for 5 years)
• Very Best Paper Award, Korea Society of Combustion (KOSCO), Spring 2018
• Best Paper Award, Korea Society of Combustion (KOSCO), Fall 2017
• Best Paper Award, Korea Society of Combustion (KOSCO), Fall 2016
• Best Paper Award, Korea Society of Combustion (KOSCO), Fall 2015
• Best Paper Award, Korea Academia-Industrial Cooperation Society (KAIS), Fall 2014
• Best Paper Award, Korea Academia-Industrial Cooperation Society (KAIS), Fall 2013
• Best Paper Award, Korea Society of Combustion (KOSCO), Fall 2011
• Best Teaching Award, Sunchon National University, Top of Engineering College, 2014

연구실적

International Journal Papers

• 22. Measurement of laminar burning velocity and Markstein length in outwardly propagating spherical SNG-air premixed flames at elevated pressure, Fuel, Vol. 275, 117952, pp. 1~10, 2020
• 21. An experimental study on thermoacoustic instabilities in syngas-air premixed impinging jet flames, Vol. 257, 115921, pp. 1~9, 2019
• 20. Experimental study of the beating behavior of thermoacoustic self-excited instabilities in dual swirl combustors, Experimental Thermal and Fluid Science, Vol. 105, No. 2, pp. 1~10, 2019
• 19. Effect of additional diluents on flame propagation speed and markstein length in outwardly propagating premixed methane/ethylene-air flames , J. of Mechanical Science and Technology, Vol. 32, No. 11, pp. 5501~5509, 2018
• 18. An Experimental Study on the Effect of Turbulence Generating Plate in Low Swirl Combustor , J. of Mechanical Science and Technology, Vol. 31, No. 12, pp. 6077~6084, 2017
• 17. Downstream interaction between SNG ? Air premixed flames, Fuel, Vol. 210, No. 10, pp. 545~556, 2017
• 16. Study on laminar burning velocity of syngas-air premixed flames in various mixing conditions, J. of Mechanical Science and Technology, Vol.29, No.7, pp.3005~3015, 2015
• 15. Effect of various gas compositions on gas interchangeability and combustion characteristics for domestic appliances, J. of Mechanical Science and Technology, Vol.27, No.4, pp.1191~1201, 2013
• 14. An Experimental Study on the Acoustically Excited Impinging Inverse Diffusion Flames, International J. of Combustion, 2011
• 13. Effects of Hydrogen Addition on Soot Formation and Oxidation in Laminar Premixed C2H2/air Flames, International J. of Hydrogen Energy, Vol.36, No.7, pp.9304~9311, 2011
• 12. Development of Analytical Alogrithm for the Performance Analysis of Power Train System of an Electric Vehicle, J. of Springer Proceedings in Physics, Vol.135, pp.223~233, 2010
• 11. Influences of Heat Loss on NO, Formation in a Premixed CH4/Air-Fueled Combustor, Energy & Fuel, Vol.23, No.9, pp.4378~4384, 2009
• 10. Fundamental Studies of NOx Emission Characteristics in Dimethyl Ether (DME)/Air Non-premixed Flames, Energy & Fuel, Vol.23, No.1, pp.754~761, 2009
• 9. A Visual Study on Turnabout Phenomenon of Vortex Roll-up in Forced Jet Diffusion Flames, J. of Mechanical Science and Technology, Vol.21, No.12, pp.2221~2228, 2007
• 8. A Numerical Study on the Temperature Increase in the Resistive SFCL Element due to the Quench Condition, Transaction on IEEE Applied Superconductivity, Vol.16, No.2, pp.636~641, 2006
• 7. Chemical Effects of CO2 Addition to Oxidizer and Fuel Streams on Flame Structure in H2-O2 Counterflow Diffusion Flames, International J. of Energy and Research, Vol.27, No.10, pp.275~285, 2003
• 6. A Visual Study on Flame Behavior of Tone-excited Non-premixed Jet Flames, Fuel, Vol.81, No.17, pp.2249~2255, 2002
• 5. Chemical Effect of Diluents on Flame Structure and NO Emission Characteristic in Methane-air Counterflow Diffusion Flame, International J. of Energy and Research, Vol.26, No.13, pp.1141~1160, 2002
• 4. NO Emission Characteristics in Counterflow Diffusion Flame of Blended Fuel of H2/CO2/Ar, International J. of Energy and Research, Vol.26, No.3, pp.2295~243, 2002
• 3. Effects of CO2 Addition on Flame Structure in Counterflow Diffusion Flame of H2/CO2/N2 Fuel, International J. of Energy and Research, Vol.25, No.6, pp.469~485, 2001
• 2. Effects of Ambient Pressure on Flame Structure of CO/H2/N2 Counterflow Diffusion Flame, International J. of Energy and Research, Vol.24, No.1, pp.187~205, 2001
• 1. A Large-scale Structural Mixing Model Applied to Blow-out of Turbulent Non-premixed Flame in a Cross Air Flow, Journal of the Institute of Energy, 1997.

Domestic Journal Papers

• 55. Combustion characteristics by plate shape of turbulence generator in low swirl combustor, J. of the Korean Society of Combustion, Vol.25, No.1 , pp.1 ~ 11, 2020
• 54. Numerical investigation of low pollution combustion with applying flue gas recirculation in counterflow flames : Part I. Combustion characteristics of low NOx, J. of the Korean Institute of Gas, Vol. 23, No. 6, pp. 8 ~ 16, 2019
• 53. Investigation of oxidation sensitivity with temperature of steel plate type, J. of the Korean Hydrogen & New Energy Society, Vol.30, No.5 , pp.455 ~ 464, 2019
• 52. Comparison of combustion characteristics with and without water tube simulating heat exchanger in two sections porous media burner, J. of the Korean Institute of Gas, Vol. 23, No. 5, pp. 24 ~ 34, 2019
• 51. Laminar burning velocity measurement of spherical propagating SNG-air premixed flames through verification of combustor, J. of the Korean Society of Combustion, Vol.24, No.3 , pp.41 ~ 48, 2019
• 50. A study on measurement of laminar burning velocity and Markstein length of SNG fuel in spherical propagation flame, J. of the Korean Hydrogen & New Energy Society, Vol.30, No.1 , pp.67~75 , 2019
• 49. Chemical interaction in downstream flows of SNG/Air symmetric premixed counterflow flame, J. of the Korean Hydrogen & New Energy Society, Vol.29, No.6 , pp.668~679 , 2018
• 48. Experimental study on the radiation efficiency and combustion characteristics with respective to the mat thickness and the fuel kinds in metal-fiber burner, J. of the Korean Hydrogen & New Energy Society, Vol.29, No.5 , pp.512~522 , 2018
• 47. A study on flame oscillation in premixed syngas(H2/CO) impingement jet flames Part II : Characteristic of oscillating lifted disc flame , J. of the Korean Society of Combustion, Vol.23, No.3 , pp.50~57 , 2018
• 46. A study on flame oscillation in premixed syngas(H2/CO) impingement jet flames Part I : Disc lifted flame characteristics , J. of the Korean Society of Combustion, Vol.23, No.3 , pp.1~9 , 2018
• 45. A study on the flame lift-off height in a lean-premixed l ow swirl combustor, J. of the Korean Society of Combustion, Vol.23, No.3 , pp.36~42 , 2018
• 44. A Study on Behavior of Surface Oxidation with Steel Type, J. of the Korean Hydrogen & New Energy Society, Vol.29, No.4 , pp.378 ~385 , 2018
• 43. A study on behavior of steel surface oxidation with characteristics of the combustion , J. of the Korean Hydrogen & New Energy Society, Vol.28, No.4 , pp.392 ~400 , 2017
• 42. A study on the combustion characteristics with hydrogen contents of SNG fuel in low-swirl combustor , J. of the Korean Hydrogen & New Energy Society, Vol.28, No.2 , pp.181 ~189 , 2017
• 41. Combustion Instability Characteristics due to the Beating Phenomenon in the Dual Swirl Gas Turbine Model Combustor, J. of the Korean Society of Propulsion Engineers, Vol. 20 , No.6 , pp.61 ~6 9, 2016
• 40. Laminar burning velocity measurement of SNG/Air flames : A comparison of Bunsen and Spherical flame method, J. of the Korean Hydrogen & New Energy Society, Vol.27, No.6 , pp.737 ~746 , 2016
• 39. A Study on Flame Extinction Behavior in Downstream Interaction between SNG/Air Premixed Flames, J. of the Korean Society of Combustion, Vol.21, No.4 , pp.48 ~60 , 2016
• 38. Effect of s wirl a ngles and c ombustion c haracteristics of l ow sirl m odel c ombustor, J. of the Korean Society of Propulsion Engineers, Vol. 20 , No.4 , pp.4 0~4 9, 2016
• 37. A Study of Combustion Instability Mode according to the Variation of Combustor Length in Dual Swirl Gas Turbine Model Combustor, J. of the Korean Society of Combustion, Vol.21, No.2 , pp.29 ~37 , 2016
• 36. A Study on the Lift Flame Structure with Composition Ratios in Premixed Impinging Jet Flames of Syngas (H2/CO), J. of the Korean Hydrogen & New Energy Society, Vol.27 , No.2 , pp.220 ~229 , 2016
• 35. A Study on the Lifted Flame Strucuture with Strain Rates in Premixed Impinging Jet Flames of Syngas (H2/CO), J. of the Korean Hydrogen & New Energy Society, Vol.26, No.4, pp.347~356, 2015
• 34. An Experimental Study on Combustion Instability in Model Gas Turbine Combustor using Simulated SNG Fuel, J. of the Korean Society of Combustion, Vol.20, No.1, pp.1~10, 2015
• 33. A Study on the Flame Shape and the Interaction between Pilot and Main Flames in a Dual Swirl Combustor, J. of the Korean Society of Propulsion Engineers, Vol.18, No.4, pp.33~42, 2014
• 32. A Study of Thermal Characteristics in Porous Surface Radiant Burner, J. of the Korean Society of Mechanical Technology, Vol.16, No.3. pp.1551~1557, 2014
• 31. A Study on Combustion and Heat Transfer in Premixed Impinging Flames of Syngas(H2/CO)/Air Part I: Characteristics of Combustion, J. of the Korean Hydrogen & New Energy Society, Vol.25, No.1, pp.47~58, 2014
• 30. A Study on Combustion and Heat Transfer in Premixed Impinging Flames of Syngas(H2/CO)/Air Part II: Heat Transfer Characteristics, J. of the Korean Hydrogen & New Energy Society, Vol.25, No.1, pp.59~71, 2014
• 29. A Study on the Laminar Burning Velocity and Flame Structure with H2 Content in a Wide Range of Equivalence Ratio of Syngas(H2/CO)/Air Premixed Flames, J. of the Korean Society of Combustion, Vol.19, No.1, pp.17~28, 2014
• 28. A Study of Combustion Instability Mode in Dual Swirl Gas Turbine Combustor by PLIF and Chemiluminescence Measurement, J. of the Korean Society of Combustion, Vol.19, No.1, pp.29~38, 2014
• 27. Development of Hybrid/Dual Swirl Jet Combustor for a MGT (Part II: Numerical Study on Isothermal Flow), J. of the Korean Society of Propulsion Engineers, Vol.17, No.5, pp.70~79, 2013
• 26. Development of Hybrid/Dual Jet Combustor for a MGT (Part I: Experimental Study on Geometric Optimization), J. of the Korean Society of Propulsion Engineers, Vol.17, No.5, pp.60~69, 2013
• 25. A Study on the Laminar Burning Velocity of Synthetic Gas of Coal Gasification(H2/CO)-Air Premixed Flames, J. of the Korean Hydrogen & New Energy Society, Vol.23, No.5, pp.493~502, 2012
• 24. A Study on Combustion Characteristics of Synthetic Gas Air Lifted Premixed Flames with High Strain Rate in an Impinging Jet Combustion Field, J. of the Korean Society of Combustion, Vol.16, No.4, pp.31~37, 2011
• 23. A Study on the Mixing Capacity of Lifted Flame by the Nozzle Hole-tone of High Frequency in Non-premixed Jet Flames, J. of the Korean Society of Visualization, Vol. 9, No. 4, pp.35~40, 2011
• 22. A Study on the Fundamental Performance of Electric-driven Bollard, J. of the Korean Society of Mechanical Technology, Vol. 13, No. 4. pp. 169~173, 2011.
• 21. Laminar Burning Velocities and Flame Stability Analysis of Hydrocarbon/Hydrogen/Carbon Monoxide-air Premixed Flames, J. of the Korean Society of Combustion, Vol.16, No.2, pp.23~32, 2011
• 20. Stability Characteristics of Syngas(H2/CO)/Air Premixed Flames using an Impinging Jet Burner, J. of the Korean Society of Combustion, Vol.16, No.1, pp.15~21, 2011
• 19. A Study on the Heat Transfer Characteristics of a High Velocity Impinging Inverse Diffusion Flames, J. of the Korean Society of Mechanical Technology, Vol. 12, No. 4. pp.11~163, 2010
• 18. The Development of a Compact Air Compressor for Generating Micro Bubbles, J. of the Korean Society of Mechanical Technology, Vol. 12, No. 4. pp.161~166, 2010
• 17. An Experimental Study on the Flame Appearance and Heat Transfer Characteristics of Acoustically Excited Impinging Inverse Diffusion Flames, J. of the Korean Academia-Industrial Cooperation Society, Vol. 11, No.10. pp.3647~3653, 2010
• 16. A Study of Flow Characteristics by Acoustic Excitation on the Laminar Non-premixed Jet Flame, J. of the Korean Society for Aeronautical and Space Sciences, Vol.38, No.2, pp.160~168, 2010
• 15. NOx Formation Characteristics on Heat Loss Rate for CH4/Air Premixed Flames in a Perfectly Stirred Reactor, J. of the Korean Academia-Industrial Cooperation Society, Vol. 10, No.7, pp.1465~1472, 2009
• 14. An Investigation of the Heat Loss Model for Predicting NO Concentration in the Downstream Region of Laminar CH4/Air Premixed Flames, Transaction of KSME(B), Vol.33, No.7, pp.486~494, 2009
• 13. Behavior of the Coherent Structure on the Attached Forced Flame, J. of the Korean Society of Marine Engineering, Vol.33, No.2, pp.259~266, 2009
• 12. A Combustion Characteristics of Attached Jet Flame under the Regular Oscillation, Transaction of Korean Institute of Fire Science and Engineering, Vol.23, No.1, pp.55~62, 2009
• 11. A Study of NO Emission Characteristics in a Non-premixed Counterflow Flame with H2/CO2/Ar Blended-fuel, Transaction of the Korean Society of Automotive Engineers, Vol.15, No.4, pp.146~153, 2007
• 10. An Effects of CO2 Addition on Flame Structure in a Non-premixed Counterflow Flame, Transaction of the Korean Society of Automotive Engineers, Vol.15, No.3, pp.166~173, 2007
• 9. Effects of Combustion Atmosphere Pressure on Non-premixed Counterflow Flame, J. of the Korean Society of Marine Engineering, Vol.303, No.8, pp.853~862, 2006
• 8. A Study on Transient Numerical Simulation on Heat Transfer Characteristics in the Resistive SFCL,  The Korea Institute of Applied Superconductivity and Cryogenics, Vol.7, No.4, pp14~19, 2005
• 7. A Numerical Study on Chemical Effects of CO2 Addition to Oxidizer and Fuel Streams in H2-O2 Counterflow Diffusion Flames, Transaction of KSME(B), Vol.28, No.4, pp.371~381, 2004
• 6. Effects of Flow Excitation on the Nitrogen Oxide Emission of a Non-premixed Flame, Transaction of Korean Institute of Fire Science and Engineering, Vol.18, No.2, pp.34~40, 2004
• 5. A Visual Investigation of Coherent Structure Behavior Under Tone-Excited Laminar Non-Premixed Jet Flame, Transaction of KSME(B), Vol.27, No.3, pp.275~285, 2003
• 4. A Large-scale Structural Mixing Model applied to Blowout of Turbulent Non-premixed Jet Flames in a Cross Jet Flow, Transaction of KSME(B), Vol.26, No.1, pp.133~140, 2002
• 3. Characteristics of Turbulent Nonpremixed Jet Flame in Cross Air Flow, Transaction of KSME(B), Vol.26, No.1, pp.125~132, 2002
• 2. An Experimental Study on Flame Spread in One-Dimensional Droplet Array with Forced Convection, Transaction of KSME(B), Vol.24, No.1, pp.68~74, 2000
• 1. A Study on Structures and NOx formation Characteristics in Co-flow and Counterflow Diffusion Flamelet, J. of the Korean Society of Combustion, Vol.3, No.2, pp.29~40, 1998

프로젝트 수행실적

Current Projects

• 1. 발전용 H급 가스터빈 캔타입 저선회 버너 원천기술 개발, 한국에너지기술평가원(KETEP), 2018.05 ~ 2022.04 (48개월)
• 2. 프렉탈 격자를 이용한 난류 연소속도 증대에 관한 연구, 한국연구재단(NRF) 기초연구, 2019.6 ~ 2022.02 (33개월)
• 3. 다종연료 맞춤형 오염저감 연소기술 개발, 한국산업기술평가관리원(KEIT), 2019.04 ~ 2022.12 (45개월)
• 4. 분산발전 가스터빈용 수소 전소 저NOx 연소기 개발, 한국에너지기술평가관리원(KETEP), 2020.05 ~ 2025.04 (60개월)

Past Projects

• 1. 산업용 보일러 극초저공해 연소기술 개발, 한국에너지기술평가원(KETEP), 2015.10 ~ 2019.09 (48개월)
• 2. 강판용 고효율 연속 열처리시스템 개발, 한국에너지기술평가원(KETEP), 2015.12 ~ 2019.09 (48개월)
• 3. 메탈 화이버 표면 복사연소에 의한 친환경 가스식 볼라드 개발, 산업통상자원부(전남전략기획단), 2017.04~2018.12 (20개월)
• 4. 미세먼지 및 전력정책에 따른 석탄화력 발전방향 연구, 남동발전 위탁, 2017.12 ~ 2018. 12 (12개월)
• 5. 200kW 마이크로 가스터빈 열병합 발전시스템 상용화 (STX중공업, 위탁), 한국에너지기술평가원(KETEP), 2011.07 ~ 2016.06 (60개월)
• 6. 전력사용 저감을 위한 열화학에너지 이용 고효율 Smart 전기로(EAF) 실증기술 개발 (SAC, 위탁), 한국에너지기술평가원(KETEP), 2013.06 ~ 2017.05 (48개월)
• 7. 희박 예혼합 연소기용 저선회 연소기법 연구, 한국연구재단(NRF) 기초연구, 2015.11 ~ 2018.10 (36개월)
• 8. 소형 선박엔진에 적합한 해수 냉각식 인터쿨러 개발, 중기청(SMTECH), 2015.05 ~ 2016.04 (12개월)
• 9. 충돌 제트기법을 이용한 저발열량 합성가스와 바이오가스의 연소 및 열전달 성능에 관한 연구, 한국연구재단(NRF) 기초연구, 2011.05 ~ 2014.04 (36개월)
• 10. 미주 수출향 업소용 가스 튀김기의 고효율 연소기 개발, 중기청(SMTECH), 2013.08 ~ 2014.07 (12개월)
• 11. 수직형 해상풍력 기반 복합 발전시스템 블레이드 공력설계 연구, 중기원(SMTECH), 2011.06 ~ 2013.05 (24개월)
• 12. NEV용 고효율 CO2 히트펌프식 냉난방 시스템 개발, 한국산업진흥원(KIAT), 2009.10 ~ 2012.04 (30개월)
• 13. 자동제어식 전동 볼라드 개발, 중기청(SMTECH), 2010.06 ~ 2011.05 (12개월)
• 14. 미세기포 발생기용 초소형 공기 압축기 개발, 중기청(SMTECH), 2009.06 ~ 2010.05 (12개월)
• 15. 충돌 가열장치 적용을 위한 가진된 역확산 화염 구조와 열전달 특성 연구, 한국연구재단(NRF) 기초연구, 2009.05 ~ 2011.04 (36개월)

(Last updated : July 27, 2020)

학력

• 한국과학기술원(KAIST) 기계공학과 공학박사 (2021)
• 한국과학기술원(KAIST) 기계공학과 공학석사 (2017)
• 인하대학교 조선해양공학과 공학사 (2015)

주요경력

• 2024.03 ~ 국립순천대학교 기계우주항공공학부 조교수
• 2021.07 ~ 2024.02 LG화학 CTO 기반기술연구소 책임연구원 (Professional)

연구분야

• 구조/유동/분체 해석, 유체-구조-분체 상호작용 해석
• C/C++, Python, Fortran, Matlab 등 컴퓨터 언어를 활용한 전산해석기법 직접 개발
• 인공지능 기법과 전산해석기법의 융합 연구
• 상용소프트웨어의 유저정의함수 개발을 통해 특수한 공학문제 해결 연구

주요연구실적

• (8) Comparative Analysis of Granular Material Flow: Discrete Element Method and Smoothed Particle Hydrodynamics Approaches, Physics of Fluids, 2025
• (7) Fast Marching based Rendezvous Path Planning for a Team of Heterogeneous Vehicle, IEEE Access, 2024.
• (6) Segment-Based Wall Treatment Model for Heat Transfer Rate in Smoothed Particle Hydrodynamics, Physics of Fluids, 2024.
• (5) Direct imposition of the wall boundary condition for weakly compressible flows in three-dimensional smoothed particle hydrodynamics simulations, Physics of Fluids, 2023.
• (4) A new SPH-FEM coupling method for fluid-structure interaction using segment-based interface treatment, Engineering with Computers, 2023.
• (3) Application of artificial neural networks using sequential prediction approach in indoor airflow prediction, Journal of Building Engineering, 2023.
• (2) Direct imposition of the wall boundary condition for simulating free surface flows in SPH, Structural Engineering and Mechanics, 2021.
• (1) A density int erpolation method for smoothed particle hydrodynamics, Advances in Engineering Software, 2021.

학력

• 2007-2012 한국과학기술원(KAIST) 기계공학과 공학박사
• 2004-2007 한국과학기술원(KAIST) 기계공학과 공학석사
• 2000-2004 국립순천대학교 기계공학과 공학사

주요경력

• 2024-현재 국립순천대학교 기계우주항공공학부 조교수
• 2022-2024 조선대학교 용접.접합과학공학과 조교수
• 2021-2022 Gentherm GmbH (독일) Advanced System Engineer
• 2016-2020 Bremer Institut fuer angewandte Strahltechnik GmbH (브레멘 응용광기술연구소, 독일) wissenschaftliche Mitarbeiter
• 2012-2016 삼성SDI 생산기술연구팀 책임

연구분야

• Welding and Joining Processes
• Laser Materials Processing
• Computational Materials Processing
• Welding Physics
• Li-ion Battery Manufacturing System

학회활동

• 2023-현재 대한용접접합학회 편집이사

주요연구실적

• 구글 스칼라 프로필 링크

프로젝트 수행실적

• 레이저 키홀 용접에서 레이저 빔 반사 현상에 대한 연구, 한국연구재단(NRF) 생애첫연구, 2023.3-2026.2

학력

• Queen's University (Canada), Mechanical and Materials Engineering, Ph.D

주요경력

• 2025 - 현 재 : 국립순천대학교 기계우주항공공학부
• 2016 - 2025 : 울산과학대학교 기계공학부
• 2013 - 2016 : (주)한화 종합연구소
• 2011 - 2013 : 삼성전자(주) 생활가전사업부

연구분야

• 소음진동 / 최적설계

학회활동

• 대한기계학회 동역학·제어·로봇 부문 전문이사
• 한국소음진동공학회 기계부문 이사

주요연구실적

• Sun-Yong Kim and Dooho Lee, Experimental investigation of a modular helix-acoustic black hole, Applied Acoustics, Volume 214, 2023, 109661, ISSN 0003-682X, https://doi.org/10.1016/j.apacoust.2023.109661
• Sun-Yong Kim. Constrained sensitivity filtering technique for topology optimization with lower computational expense. Int J Numer Methods Eng. 2023; 124(18): 4075-4096. doi: 10.1002/nme.7301
• Sun-Yong Kim and Dooho Lee. Numerical simulation of characteristics of wave propagation and reflection coefficient in a helix-acoustic black hole. Journal of Vibration and Control. 2022;28(5-6):615-625. doi:10.1177/1077546320980570

학력

• 1999-2003 충남대학교 금속공학과 공학박사 (금속 3D 프린팅)
• 1995-1997 홍익대학교 금속재료공학과 공학석사 (경량소재)
• 1988-1995 군산대학교 재료공학과 공학사

주요경력

• 2024.09 - 현재 국립순천대학교 부교수
• 2025.01 - 2026.12 순천시 주택 도시가스 공급 심위위원회 위원
• 2022.12 - 현재 광양시 4차산업혁명위원회 위원
• 2022.04 - 2024.12 포항 ICT기반 사회문제해결기술개발 전문위원
• 2021.01 - 현재 (사)한국레이저가공학회 사업이사
• 2008.12 - 현재 한국산업평가원 산업기술혁신 평가단 정위원
• 2007.11 - 2024.08 (재)전남테크노파크 센터장(레이저/신금속/철강)
• 2006.05 - 2007.11 ㈜이노캐스트 기술연구소 차장
• 2001.09 - 2006.05 ㈜인스텍 생산기술연구소 차장
• 1998.12 - 2001.08 한국원자력연구소 연구원
• 1997.11 - 1998.11 ㈜CTI 반도체 대리

연구분야

• 레이저 재료 가공(절단/드릴링/용접/표면처리/마킹)
• 레이저 클래딩 및 금속 3D 프린팅
• 경량화 소재 및 성형(마그네슘/알루미늄/타이타늄)

주요연구실적

• Study on the laser hardfacing of amorphous material to improve wear resistance of Co-free hardfacing alloys
• Characteristic of aluminum secondary battery using laser welding system
• Laser Welding Characteristic of Copper for secondary battery material
• Preliminary experimental analysis of the laser cladding process for STS 316L powder
• Consideration of a local aluminum-induced crystallization precess guided along the μ-holes fabricated with ultra-short laser pulses
• Modification of embedded gratings in flexible sheets using femtosecond laser irradiation
• Novel optical fiber-based laser direct writing process for micromachining of metal
• Picosecond optical pulse characteristics of a gain-switched VCSEL utilizing cost-effective RF electronics circuits
• Feature analysis of the microgroove structures utilizing the optical models
• Note-PC case fabrication by press forming of magnesium alloy sheet
• Study on the laser hardfacing of amorphous material(Co-free) on stainless steels to improve their wear resistance
• Tensile Ductility Behavior of Al-(5, 7, 10%)Mg Alloys at elevated temperatures
• Effects of Mg concentration on the quasi-superplasticity of coarse-grained Al-Mg alloys
• Development of Automtive Shift Control Component Using High Performance Alloy

프로젝트 수행실적

• 이차전지 및 철강 스마트제조 고급인력양성사업(2024-2026)
• 이차전지 양극재 소재·합성 실증센터 구축 용역(2023)
• 철강산업 재도약 기술개발(2022-2025)
• 알루미늄 부품 레이저 브레이징 장비 실증(2021-2022)
• 수출형 기계부품가공 기반구축사업(2020-2022)
• 수송기기용 마그네슘 소재실증(2020-2022)
• 광융합(광학, 레이저)분야 석·박사 산업전문인력사업(2019-2020)
• 차세대 스텐트 공정혁신 기술고도화지원사업(2018-2023)
• Bio-IoT 센서 및 부품 가공시스템 지원사업(2018-2023)
• Ni MHP로부터 3N급 내열내식 합금용 Ni금속 제조기술 및 100nm이하급 MLCC용 Ni나노 분말 제조 기술개발(2017-2020)
• 전남지역 강소기업육성사업(2016)
• 박형 실리콘 태양전지 파손율 저감 기술개발(2016-2020)
• 태양광모듈용 고투과 패턴유리 제조를 위한 대면적 레이저시스템 개발(2016-2018)
• 평판형 광 도파로 제작 기술을 이용한 초소형/ 저가형 펨토초 모드 잠금 레이저 개발(2015-2018)
• Al/TiO2 융합형 경량화 자외선 살균기 개발(2015-2017)
• 모바일 6축 Gantry 로봇을 이용한 금속표면처리 응용 시스템 개발(2015-2017)
• 실시간 공정 모니터링 기반 하이브리드 레이저 미세용접 시스템개발(2012-2015)
• 차세대 마이크로응용 레이저가공시스템 기반구축사업(2011-2016)