학력

• 인하대 금속공학과 학사 (1991)
• 서울대 금속공학과 석사 (1994)
• 서울대 금속공학과 박사 (1998)

주요경력

• 1998.3. ~ 1999.3. 신소재공동연구소, 서울대학교 소성가공공정연구실 Post Doc
• 1998.10. ~ 1999.10. Alcoa 기술연구소, USA Micromechanics 그룹 Post Doc
• 2000.3. ~ 2004.3. POSCO 기술연구소 자동차소재연구그룹 선임연구원
• 2004.4. ~ 2005.3. POSCO 기술연구소 자동차소재연구그룹 책임연구원
• 2005.4. ~ 2013.5. 순천대학교 부교수
• 2013.6. ~ 현재. 순천대학교 교수

주요연구실적

• J Singh, MS Kim, L Kaushik, J-H Kang, D Kim, E Martin, S-H Choi ; Twinning-detwinning behavior of E-form Mg alloy sheets during in-plane reverse loading, International Journal of Plasticity, Vol.127 (2020), 102637
• J Singh, MS Kim, S-H Choi; The effect of initial texture on micromechanical deformation behaviors in Mg alloys under a mini-V-bending test, International Journal of Plasticity, Vol.117 (2019), 33-57
• J Singh, MS Kim, J-H Lee, H Guim, S-H Choi; Microstructure evolution and deformation behaviors of E-form and AZ31 Mg alloys during ex-situ mini-V-bending tests, Journal of Alloys and Compounds, Vol.778 (2019), 124-133
• DK Kim, W Woo, E-Y Kim, S-H Choi; Microstructure and mechanical characteristics of multi-layered materials composed of 316L stainless steel and ferritic steel produced by direct energy deposition, Journal of Alloys and Compounds, Vol.774 (2019), 896-907
• CS Hyun, MS Kim, S-H Choi, KS Shin; Crystal plasticity FEM study of twinning and slip in a Mg single crystal by Erichsen test, Acta Materialia, Vol.156 (2018), 342-355

학력

• 1989. 3. ~ 1996. 2. 성균관대학교 금속공학과 공학학사
• 1996. 3. ~ 1998. 2. 광주과학기술원 신소재공학과 공학석사
• 1998. 3. ~ 2002. 2. 광주과학기술원 신소재공학과 공학박사

주요경력

• 2002. 1. ~ 2004. 2. 한국전자통신연구원 광통신소자연구부 선임연구원
• 2004. 2. ~ 2005. 1. 국립순천대학교 재료금속공학과 전임강사
• 2005. 1. ~ 2009. 4. 국립순천대학교 재료금속공학과 조교수
• 2005. 1. ~ 2005. 12. 일본산업기술종합연구소 (AIST) 초빙 연구원
• 2007. 8. ~ 2008. 7. 미국 RPI 방문 교수
• 2009. 5. ~ 2014. 4.국립순천대학교 재료금속공학과 부교수
• 2014. 5. ~ 현재. 국립순천대학교 인쇄전자공학과 교수
• 2020. 3. ~ 현재. 국립순천대학교 첨단부품소재공학과 교수

주요연구실적

• Maddumage Don Sandeepa Lakshad Wimalananda, Jae-Kwan Kim, Ji-Myon Lee, Characteristics of highly area-mismatched graphene-to-substrate transfers and the predictability of wrinkle formation in graphene for stretchable electronics. Advanced Materials Interfaces (in print)
• Maddumage Don Sandeepa Lakshad Wimalananda, Jae-Kwan Kim, Ji-Myon Lee, Morphological effect and conductivity tunability of different regions in a single graphene film by surface steps, Carbon,165, 1-8 (2020)
• Maddumage Don Sandeepa Lakshad Wimalananda, Jae-Kwan Kim, Ji-Myon Lee, Selective growth of monolayer and bilayer graphene patterns by rapid growth method, Nanoscale, 11, 6727 - 6736 (2019)
• Kondasinghe Gayantha Nishan Thilawala, Jae-Kwan Kim, and Ji-Myon Lee, Potential of Graphene for Shape-Directing Agent free Growth of Highly Oriented Silver Particles and their Application in Surface Enhanced Raman Scattering. J. Alloy. Compd. 787, 893-902 (2019).
• Kondasinghe Gayantha Nishan Thilawala, Jae-Kwan Kim, Ji-Myon Lee, Improvement of Conductivity of Graphene-Silver Nanowire Hybrid through Nitrogen Doping using Low Power Plasma Treatment, J. Alloy. Compd. 773, 1009-1017 (2019).
• Bastian Waduge Naveen Harindu Hemasiri, Jae-Kwan Kim, Ji-Myon Lee, Synthesis and characterization of graphene/ITO nanoparticle hybrid transparent conducting electrode, Nano-Micro Lett. 10, 18 (2018).
• Maddumage Don Sandeepa Lakshad Wimalananda, Jae-Kwan Kim, Ji-Myon Lee, Patterning of silver nanowire for grid formation by using ultrasonic assisted clean chemical etching for the application of high transparent electrode, Mater. Sci. & Eng. B. 228, 67-73 (2018).
• Maddumage Don Sandeepa Lakshad Wimalananda, Jae-Kwan Kim, Ji-Myon Lee, Towards the ultra-transparent electrode by using patterned silver nanowire and graphene layered materials, Carbon, 125, 9-19 (2017).
• Bastian Waduge Naveen Harindu Hemasiri, Jae-Kwan Kim, Ji-Myon Lee, Fabrication of Highly Conductive Graphene/ITO Transparent Bi-Film through CVD and Organic Additives-Free Sol-Gel Techniques, Sci. Rep. 7, 17868
• M. D. S. Lakshad Wimalananda, Jae-Kwan Kim, Ji-Myon Lee, Rapid synthesis of a continuous graphene film by chemical vapor deposition on Cu foil with various morphological condition modified by Ar plasma, Carbon, 120, 176-184 (2017).

학력

• 박사학위, 1999
  울릉공 대학 화학과, 호주.
• 석사학위, 1990
  동아대학교 대학원, 화학공학과.
• 학사학위, 1987
  국립 부경대학교, 화학공학과

주요경력

• 1999 ~ 2000, 연구원, University of Wollongong(UOW) 부설 지능형고분자 연구소, 호주
• 2000 ~ 2002, 일본 문부성 초빙 JSPS 펠로우쉽, 치토세 과학기술 대학교, 일본
• 2002 ~ 2011, 전문연구원, UOW 부설 지능형고분자 연구소, 호주
• 2011 ~ 2018, 수석연구원, 호주 연방 전자재료 연구소, 호주
  특별초빙교수, 동국대학교 화학과, 서울
• 2018 ~ 현재, 교수, 첨단부품소재공학과, 국립순천대학교

주요연구실적

Top 10 publications

• 1.P. Thondaiman, C. Justin Raj, R. Velayutham, A. Marotrao kale, Byung Chul Kim*, Surface-Active Edge-Rich sites in 2D layered cobalt Hydroxide/Phosphide interfaces for High-Performance aqueous Sodium-Ion energy storage, Chemical Engineering Journal 484 (2024) 149508 (IF: 15.1)
• 2.Anupriya James, Shivakumar, John D Rodney, Sindhur Joshi, Udayakumar Dalimba, Byung Chul Kim*, N.K. Udayashankar, Mechanistic insights and DFT analysis of bimetal doped styrofoam-like LaFeO3 perovskites with in-built dual redox couples for enhanced Photo-Fenton degradation of Tetracycline, Chemical Engineering Journal 481 (2024) 148466 (IF: 15.1)
• 3.A. Dennyson Savariraj, C. Justin Raj, A.M. Kale, Byung Chul Kim*, Road Map for In Situ Grown Binder-Free MOFs and Their Derivatives as Freestanding Electrodes for Supercapacitors, Small (2023) 2207713 (IF: 13.3)
• 4.R. Velayutham, C. Justin Raj, H.M. Jang, W.-J. Cho, K. Palanisamy, C. Kaya, Byung Chul Kim*, Surface-oriented heterostructure of iron metal organic framework confined molybdenum disulfides as an efficient bifunctional electrocatalyst for overall water splitting, Materials Today Nano 24 (2023) 100387 (IF: 10.3)
• 5.R. Manikandan, A.D. Savariraj, G. Nagaraju, A.M. Kale, J. Puigdollers, H. Park, H.-S. Kim, J.-M. Oh, C.J. Raj, Byung Chul Kim*, Mixed-phase composites derived from cobalt terephthalate as efficient battery-type electrodes for high-performance supercapattery, Journal of Materials Science and Technology 157 (2023) 220· 233 (IF: 10.9)
• 6.P.R. Ilango, A. Dennyson Savariraj, H. Huang, L. Li, G. Hu, H. Wang, X. Hou, Byung Chul Kim, S. Ramakrishna, S. Peng, Electrospun Flexible Nanofibres for Batteries: Design and Application, Electrochemical Energy Reviews 6 (2023) 12 (IF: 31.3)
• 7.P. Thondaiman, C.J. Raj, R. Manikandan, D.S. Antonysamy, J. Puigdollers, C. Kaya, Byung Chul Kim*, Two-Dimensional Synergistic Interfacial Orientation on Tin Oxide-Reinforced Cobalt Carbonate Hydroxide Heterostructures for High-Performance Energy Storage, ACS Applied Materials & Interfaces 15 (2023) 52448·52460 (IF: 9.5)
• 8.R. Manikandan, J.R. Chellan, N. Goli, P. Joaquim, V. Cristobal, Byung Chul Kim*, A Self-Branched Lamination of Hierarchical Patronite Nanoarchitectures on Carbon Fiber Cloth as Novel Electrode for Ionic Liquid Electrolyte-Based High Energy Density Supercapacitors, Advanced Functional Materials 30 (2020) 1906586 (IF: 19)
• 9.R. Manikandan, C.J. Raj, G. Nagaraju, M. Pyo, Byung Chul Kim*, Selective design of binder-free hierarchical nickel molybdenum sulfide as a novel battery-type material for hybrid supercapacitors, Journal of Materials Chemistry A 7 (2019) 25467·25480 (IF: 11.9)
• 10.Byung Chul Kim, J.-Y. Hong, Gordon G. Wallace, H.S. Park, Recent Progress in Flexible Electrochemical Capacitors: Electrode Materials, Device Configuration, and Functions, Advanced Energy Materials 5 (2015) 1500959 (IF: 27.8)

학력

• 2003 년 3 월 - 2010 년 2 월
  이학사, 순천대학교 물리학과
• 2010 년 3 월 - 2012 년 2 월
  공학석사, 순천대학교 인쇄전자공학과
• 2012 년 3 월 - 2015 년 2 월
  공학박사, 순천대학교 인쇄전자공학과

주요경력

• 2015 년 3 월 - 2020 년 2 월연구교수, 세종대학교 나노신소재공학과
• 2020 년 3 월 - 현재조교수, 국립순천대학교 인쇄전자공학과

주요연구실적

• A deep-learning technique for phase identification in multiphase inorganic compounds using synthetic XRD powder patterns [Nature communications 11(1), 1-11, 2020.]
• Rb3SiF7:Mn4+ and Rb2CsSiF7:Mn4+ Red-Emitting Phosphors with a Faster Decay Rate [Chemistry of Materials 30(19), 6936-6944, 2018.]
• Combinatorial Screening of Luminescent and Structural Properties in a Ce3+-Doped Ln-Al-Si-O N (Ln = Y, La, Gd, Lu) System: The Discovery of a Novel Gd3Al3+xSi3-xO12+xN2-x:Ce3+ Phosphor [Inorganic Chemistry 54(4), 1829-1840, 2015.]
• Discovery of a novel phosphor for LED applications and its structural determination; Ba(Si,Al)5(O,N)8:Eu2+ [Journal of the American Chemical Society 136, 2363, 2014.]
• A new paradigm for materials discovery: Heuristics-assisted combinatorial chemistry involving parameterization of material novelty [Advanced Functional Materials 22, 2258, 2012.]

학력

• 성균관대학교신소재공학과 (학사, 2011)
• 성균관대학교신소재공학과 (박사, 2018)

주요경력

• 중앙대학교전기전자공학과 박사후 연구원
• 성균관대학교신소재공학과 박사후 연구원
• 삼성전자 LCD 사업부 연구원

주요연구실적

• Catalytic Metals-Accelerated Crystallization of High-Performance Solution-Processed Earth-Abundant Metal Oxide Semiconductors [ACS Applied Materials & Interfaces , (2020), 12, 25000-25010]
• Smart Bifunctional Sb 2 Se 3 Nanorods for Integrated Water Purification: Insoluble Fluid Separation and Photoelectrochemical Water-soluble-organic Degradation [ChemSusChem , (2020), 13, 3017-3027]
• Multi-Spectral Gate-Triggered Heterogeneous Photonic Neuro-transistors for Power-Efficient Brain-Inspired Neuromorphic Computing [Nano Energy, (2019), 66, 104097]
• Environment-Adaptable Artificial Visual Perception Behaviors Using a Light-Adjustable Optoelectronic Neuromorphic Device Array [Advanced Materials, (2019), 31, 1906433]
• All-solution-processed metal oxide/chalcogenide hybrid full-color phototransistors with multi-stacked functional layers and composition-gradient heterointerface [Advanced Optical Materials , (2018), 6, 1800196]

학력

• B.S., M.S., Ph.D., Department of Mechanical Design and Production Engineering, Konkuk Univeristy, Seoul, Korea.

주요경력

• Assistant professor, Advanced Components and Materials Engineering, Sunchon National University (2020.02 -Current)
• Post-doctoral research fellow, Laboratory for Polymer Innovation for Advanced Organic Electronic (PI-AOE), Purdue University, USA (2019.09 - 2020.02).
• Associate research engineer, RPS.co.ltd, South Korea (2016.09 - 2019.07).
• Visiting researcher, VTT Technical Research Centre of Finland, Oulu, Finland (2015.06 - 2015.07).

주요연구실적

Google scholar profile: https://scholar.google.co.kr/citations?user=WvS4nA0AAAAJ&hl=ko

Journal papers

• J. Lee, B.-H. Park and C. Lee, “Fault diagnosis based on the quantification of the fault features in a rotary machine,” Applied soft computing, 106726 (2020) (Impact factor Top 7.8% in Computer science, interdisciplinary applications)
• P. Su, H. Hu, J. Lee and J. Laskin et al, “Preparative mass spectrometry using a rotating-wall mass analyzer”, Angewandte Chemie, (2020) (Impact factor Top 8.1% in Chemistry, multidisciplinary)
• J. Lee, S. Kim, and C. Lee, “Large area electrolyte coating through surface and interface engineering in roll-to-roll slot-die coating process,” Journal of Industrial and Engineering Chemistry, 76, (2019) 443-449. (Impact factor Top 9.8% in Engineering, Chemical)
• J. Lee, and C. Lee, “Model-Based Winding Tension Profile to Minimize Radial Stress in a Flexible Substrate in a Roll-to-Roll Web Transporting System,” IEEE/ASME Transactions on Mechatronics, 23(6), (2018) 2928-2939. (Impact factor Top 5% in Engineering, Mechanical)
• J. Lee, and C. Lee, “An advanced model for the numerical analysis of the radial stress in center-wound rolls,” International Journal of Mechanical Sciences, 105, (2016) 360-368. (Impact factor Top 10% in Mechanics)
• J. Lee, J. Park, H. Jeong, KH Shin, and D. Lee, “Optimization of printing conditions for microscale multiline printing in continuous roll-to-roll gravure printing,” Journal of Industrial and Engineering Chemistry, 42, (2016) 131-141. (Impact factor Top 9.8% in Engineering, Chemical)
• J. Lee, J. Seong, J. Park, S. Park, D. Lee, and K.-H. Shin, “Register control algorithm for high resolution multilayer printing in the roll-to-roll process,” Mechanical Systems and Signal Processing, 60-61 (2015) 706-714. (Impact factor Top 4.5% in Engineering, Mechanical)

Patents (PCT)

• Air cylinder, 2020022628, Published, 01/30/2020.
• Stiffness control apparatus of air bearing, 2019013368, Published, 01/17/2019.
• Stiffness control apparatus of air bearing, 2019013367, Published, 01/17/2019.

Patents (국내)

• 롤투롤 생산공정에서 동특성 개선을 위한 레지스터 제어 시스템 (Register control system for a better dynamic characteristics in a roll-to-roll manufacturing system), KR 102139880, Granted, 07/24/2020.
• 에어 베어링의 강성조절장치 (Apparatus for adjusting stiffness of air bearing), KR 101965323, Granted, 03/28/2019.
• 투명전도성 필름 제조장치 및 제조방법 (Apparatus and method for manufacturing transparent conductive film), KR 102008447, Granted, 08/01/2019.
• 압력센서 및 그 제조방법 (Pressure sensor and method of manufacturing the same), KR 101813230, Granted, 12/21/2017.
• 고정밀 레지스터 제어 시스템 및 방법 (High-precision Register Control System and Method), KR 1017439820000, Granted, 05/31/2017.

Awards

• IJPEM·Green Technology Contribution Award (2020.16)
• Academic award at Konkuk University (2019.02)
• Best paper in Int. J. Precis. Eng. Manuf. in the third quarter (2018.08)
• Best paper award for the 2015 ICFPE at the Int. Conf. Flexi. Print. Electron., Taiwan. (2015.10)
• Best paper award for the 2014 KSPE at the Korean Soc. Precis. Eng., Korea. (2014.10)
• Best presentation on Functional Printing at the Fourth Int. Conf. Print. Future Days, Germany (2011.10)

학력

• 학사 (1991-1995) Macquarie University
  전공: Environmental Geomorphology
• 석사 (1996-1997) University of Wollongong
  전공: Chemistry
• 박사 (1998 · 2002) University of Wollongong
  전공: Chemistry

주요경력

• 12/2014 · 현재 Professor, Biomedical Engineering, Swinburne University of Technology, Victoria
• 01/2014 · 12/2014 Associate Professor, ARC Centre of Excellence for Electromaterials Science, IPRI, UoW
• 01/2012 · 01/2014 Queen Elizabeth II Fellow/Associate Professor, ARC Centre of Excellence for Electromaterials Science, IPRI, UoW
• 01/2009 · 01/2012 Senior Fellow/Queen Elizabeth II Fellow, ARC Centre of Excellence for Electromaterials Science, IPRI, UoW
• 01/2002 · 01/2009 Fellow, ARC Centre of Excellence for Electromaterials Science, IPRI, UoW

주요연구실적

• 1. Alexandre Xavier Mendes, Lilith M. Caballero Aguilar, Adriana Teixeira do Nascimento,Serena Duchi, Mirren Charnley, Anita F. Quigley, Robert M.I. Kapsa, Saimon Moraes Silva,Simon E. Moulton, Integrating graphene oxide-hydrogels and electrical stimulationfor controlled neurotrophin factor encapsulation” A promising approach for efficientnerve tissue regeneration, ACS Applied Bio Materials
• 2. Adriana Teixeira do Nascimento, Alexandre X Mendes, Serena Duchi, Daniela Duc, AnitaF Quigley, Robert M I Kapsa, Lilith M. Caballero Aguilar, David R. Nisbet, Paul R Stoddart,Saimon M. Silva, Simon E. Moulton, Wired for sucess: probing the substrate effect on cell viability of tissue-engneered neural interfaces, ACS Biomaterials Science &Engineering, accepted 24 April
• 3. Pauline E. Desroches; Kilian S. Fraysse; Anita F. Quigley; Robert M. I. Kapsa; Luiza AguiarDo Nascimento; Simon E. Moulton; Mingyu Han; George W. Greene, NanocompositeFilms of Polypyrrole and Poly(3,4-ethylene dioxythiophene) Using a SurfaceTethered Dopant Strategy, Electrochimica Acta accepted 6th April.
• 4. Elizabeth Zoneff, Yi Wang, Colin Jackson, Serena Duchi, Carmine Onofrillo, BrookeFarrugia, Simon E. Moulton, Richard Williams, Clare L. Parish, David R. Nisbet, Lilith M.Caballero-Aguilar, Controlled Oxygen Delivery to Power Multifaceted TissueRegeneration, Nature Communications, 15, 4361 (2024).
• 5. Lilith et al, Electrostatic Complexation of Growth Factors in Thiol-armed HydrogelEnhances In Situ Cartilage Tissue Engineering Applied Materials Today, 2024, 38,102181
• 6. Emily Balaburov, Meenakshi Kamaraj, Stephanie E. Doyle, Zarrin Ahmadi, Claudia DiBella, Lilith M. Caballero Aguilar, Simon E. Moulton, Noninvasive Biosensing 3DScaffold to Monitor Degradation: The Potential of Fluorescent PCL and PLGA forTissue Engineering, Journal of Applied Polymer Science (Cover Image also), 2024,141(1), e54115.
• 7. Mingyu Han, Matthew J. Russo, Pauline E. Desroches, Saimon M. Silva, Anita F. Quigley,Robert M. I. Kapsa, Simon E. Moulton, George W. Greene. Calcium Ions InducedStructure and Lubrication Property Change of Hyaluronic Acid and LubricinComplex, Colloid and Surfaces B: Biointerfaces, 2024, 244, 113741.
• 8. Han, Mingyu; Russo, Matthew; Quigley, Anita; Kapsa, Robert; Moulton, Simon; Stoddart,Paul; Moraes Silva, Saimon; Schmidt, Tannin; Greene, George, Lubricin (PRG-4) antifouling coating for surface-enhanced Raman spectroscopy biosensing: Towards ahierarchical separation system for analysis of biofluids, Analyst, 2024, 149, 63-75.
• 9. Kamaraj, Meenakshi; Dalta, Amrutha; Moulton, Simon; Rath, Subha Narayan, Biomimeticmineralization of Mn-doped Biphasic Calcium Phosphate in GelMA hydrogel actingas a functional 3D bioscaffold for osteo defect repair, ACS Applied Polymer Materials,2024, 6(1), 943.

학력

• 2008 University of Pittsburgh, Materials Science and Engineering 박사
• 2002 Carnegie Mellon University, Materials Science and Engineering 석사
• 1999 고려대학교 신소재공학 석사
• 1997 고려대학교 신소재공학 학사

주요경력

• 2025-현재 국립순천대학교, 대학원 첨단부품소재공학과 부교수(산학협력중점교수)
• 2016-2025 포항산업과학연구원(RIST) 재료공정연구소 수석연구원
• 2011-2016 포항산업과학연구원(RIST) 재료공정연구소 책임연구원
• 2020-2021 SLAC National Accelerator Laboratory, Affiliated Staff Scientist
• 2008-2011 U.S. National Energy Technology Laboratory, Researcher
• 2008-2008 University of Pittsburgh, Research Associate

주요연구실적

• 2025-현재 국립순천대학교, 대학원 첨단부품소재공학과 부교수(산학협력중점교수)
• 2016-2025 포항산업과학연구원(RIST) 재료공정연구소 수석연구원
• 2011-2016 포항산업과학연구원(RIST) 재료공정연구소 책임연구원
• 2020-2021 SLAC National Accelerator Laboratory, Affiliated Staff Scientist
• 2008-2011 U.S. National Energy Technology Laboratory, Researcher
• 2008-2008 University of Pittsburgh, Research Associate

주요 연구실적 (2021-2024):

• J.S. Yang et al, Numerical optimization study on the thermal management of planar sodium nickel chloride battery module, Applied Thermal Engineering 252 (2024) 123643 https://doi.org/10.1016/j.applthermaleng.2024.123643
• J.M. Weller et al, Intrinsically sodiophilic, mesoporous metal-free wetting layers based on inexpensive carbon black for sodium-metal batteries, Nano Energy 128A (2024) 109815 https://doi.org/10.1016/j.nanoen.2024.10981
• G. Choi et al, Unraveling and regulating superstructure domain dispersion in lithium-rich layered oxide cathodes for high stability and reversibility, Energy & Environmental Science 17(13) (2024) 4634-4645 https://doi.org/10.1039/D4EE00487F
• S. Jo et al, Solid?state reaction heterogeneity during calcination of lithium?ion battery cathode, Advanced Materials 35(10) (2023) 2207076 https://doi.org/10.1002/adma.202207076
• Featured on a Front Cover https://doi.org/10.1002/adma.202370067
• J.M. Weller et al, Unlocking the NaCl-AlCl3 phase diagram for low-cost, long-duration Na-Al batteries, Energy Storage Materials 56 (2023) 108-120 https://doi.org/10.1016/j.ensm.2023.01.009
• H. Hyun et al, Suppressing high?current?induced phase separation in Ni?rich layered oxides by electrochemically manipulating dynamic lithium distribution, Advanced Materials 33(51) (2021) 2105337 https://doi.org/10.1002/adma.202105337
• D. Jin et al, Enhancing Li ion battery performance by mechanical resonance, Nano Letters 21(12) (2021) 5345-5352 https://doi.org/10.1021/acs.nanolett.1c01621
• G. Qian et al, Understanding the mesoscale degradation in Nickel-rich cathode materials through machine-learning-revealed strain?redox decoupling, ACS Energy Letters 6(2) (2021) 687-693 https://doi.org/10.1021/acsenergylett.0c02699
• M.M. Li et al, High performance sodium-sulfur batteries at low temperature enabled by superior molten Na wettability, Chemical Communications 57(1) (2021) 45-48 https://doi.org/10.1039/D0CC06987F